Each output mode is described in following sections.
There are 4 output channels allowed, which are setup in the Control window.
Each channel may output to a single different destination.
Each channel may obtain its data from
one of the data output modes described below.
Immediately on input, unmodified data will be copied to separate output buffers.
The data is in TDR RawData format and can be read into
the Event Builder package again.
The various filtering stages are executed sequentially,
and the output of the last filtering stage copied to separate output
buffers.
The data is in TDR RawData format and can be read into
the Event Builder package again.
Sets of parameters satisfying the defined Event Search criteria
can be formatted and output.
The data is no longer in RawData format and cannot be read into
the Event Builder package.
There are MTsort input handlers that can handle this event format.