Return to TDR EB guide base window
This window defines the set of sub-event clusters that are required for the experiment. Any detector sub-event clusters that are missing from the defined list on the left of the window, will result in their associated parameters being discarded.

Sub-event clusters are defined by adding them to the list using the Add Cluster menubutton.

Similarly, a cluster can be removed from the experiment setup by selecting the required name in the left-hand box, and pressing the Remove button.

Editting the cluster, can be accomplished by double-clicking on the cluster name in the left-hand window. This results in the presentation of a cluster-dependent setup window.

Cluster Edit Window

These windows all have the same layout, but differing contents.
After the cluster name section, there is a list of parameters defined for the particular cluster. Each parameter has a set of fields ...
parameter name
required/optional flag
histogram flag
display histogram button
parameter adc name entry
parameter adc name browse menubutton.

The parameter definition section is followed by the coincidence overlap width in units of clock ticks (100MHz).

Then follows, any cluster-specific routines.

Finally, there is the action menubutton, followed by any activated actions.

Cluster Output

All valid clusters are output to the event search stage.

Maintained by Janet Sampson and John Cresswell (University of Liverpool)
Email to support@ns.ph.liv.ac.uk